WD-40 Specialist Dry Lube with Smart Straw Sprays 2 Ways, 10 OZ [6-Pack] & Specialist Contact Cleaner Spray, 11 oz.

WD-40 300059 Specialist Dirt & Dust Resistant Dry Lube PTFE Spray with SMART STRAW SPRAYS 2 WAYS, 10 OZ [6-Pack]"A dry lubricant that keeps your equipment running smoothly with long-lasting corrosion protection that does not attract dirt, dust, or oil. WD-40 Specialist Dry Lube with PTFE provides superior lubrication and long-lasting corrosion protection with no oily residue. Best used where cleanliness and maximum performance are required as it dries quick leaving behind a lubricating film that resists dirt, dust and oil buildups. Great for reducing friction and wear on blades and bits, door and window tracks, slides, conveyor belts, rollers, hinges, table saws, lathes, power tools and equipment. Effective in temperatures ranging from -50°F to 500°F. - Provides 5x greater wear protection than the competition for longer-lasting lubrication and reduced application frequency* - lubricates at least 4x longer than the competition** - Safe to use on wood, paper, fabrics, leather, metal, rubber and most plastics (except clear polycarbonate and polystyrene). - NSF Category H2 (#146856) *Test Lab: WD-40 Co. Technical Center (Pine Brook, NJ); ASTM D4172; Test date: 12/2020. ** Test Lab: WD-40 Co. Technical Center (Pine Brook, NJ); ASTM D4172– Modified; Test date: 04/2021."WD-40 Specialist Electrical Contact Cleaner Spray - Electronic & Electrical Equipment Cleaner. 11 oz. (Pack of 1) - 300554-EBRAND STORY [6-Pack] In 1953, in a small lab in San Diego, California, the fledgling Rocket Chemical Company and its staff of three set out to create a line of rust-prevention solvents and degreasers for use in the aerospace industry. That’s how WD-40 Company was born. Over 60 years later, they’re still solving problems and making things work smoothly. HOW TO USE WD-40 Specialist Electrical Contact Cleaner Spray cleans oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment without leaving residue. Directions: 1. Shut off power and allow any hot surfaces to cool. Make sure all stored power is drained from the system 2. SHAKE CAN WELL 3. Flip straw UP for pinpoint stream or DOWN for wide angle spray 4. Hold can 6”-8” away from the surface and spray directly onto the electronic device or circuit board to eliminate and remove any contaminants that may cause loss of electrical contact 5. Tilt surface while cleaning and allow any excess cleaner to run off 6. Allow product to dry completely and thoroughly vent the system before restoring power Ideal for use on: printed circuit boards, controls, switches, tape heads, and precision instruments. Safe to use on all plastics, rubber, and metal. Compatible with metals, including stainless steel, galvanized steel, copper, brass, magnesium, nickel, tin plate, titanium, and zinc. PROBLEM SOLVED When using WD-40 Specialist products, you get your problem solved and the job done right. You won’t waste time or resources with these fast acting formulas with task specific solutions. The trustworthy WD-40 brand brings the same high quality product that you’ve known and loved for the past 60 years with a line of superior performing specialty maintenance products designed to meet specific needs of professional users.

• Product 1: Keep your equipment running smoothly with long-lasting corrosion protection; This Dry Lube PTFE Spray reduces friction and wear on blades and bits, door and window tracks, slides, conveyor belts, rollers, hinges, power tools, and equipment
• Product 1: The WD-40 Specialist line is designed with industrial-strength quality and extreme penetration for your hard to solve issues
• Product 1: Ideal for reducing friction and wear on multiple surfaces; It won’t attract dirt or dust, and is safe for temperatures from -50 deg F to 500 deg F
• Product 1: This specific formula is safe to use on wood, paper, fabrics, leather, metal, and most plastics (except clear polycarbonate and polystyrene); It is 50-state VOC compliant and the Smart Straw Technology allows for ultimate precision
• Product 2: Wd-40 Specialist Electrical Contact Cleaner Spray - Electronic & Electrical Equipment Cleaner. 11 Oz.
• Product 2: Electrical Contact Cleaner Spray. Wd-40 Specialist Electrical Contact Cleaner Spray Is Ideal For Removing Oil, Dirt, Flux Residue, And Condensation From Sensitive Electrical Equipment. This Quick Drying, Residue-Free Formula Is Safe On Metal And Plastic
• Product 2: Task Specific Solution. Wd-40 Specialist Offers Easy Solutions For Specific Problems. Wd-40 Specialist Line Is Designed With Industrial Strength Quality And Extreme Penetration For Your Hard To Solve Issues
• Product 2: Blast Away Debris. Blast Away Oil, Dirt, Flux Residue And Condensation From Sensitive Electronics And Electrical Equipment With Pinpoint Precision. It'S Ideal For Use On Printed Circuit Boards, Controls, Switches, Precision Instruments And Electric Panels