Water Base Conductive Paint for Electroforming | 2oz Jar Graphite Conductive Paint for Electroformed Jewelry | Copper Electroforming Supply

Water Base Graphite Conductive Paint. Use to create your own copper electroformed creations. This quick drying paint is great to use for COPPER ELECTROFORMING of organic materials(leaves, acorns, insects, flowers, etc), glass, bone, wood, plastic, clay, resin, laser cut and 3-d printed objects, and more! (basically, if you can paint it, you can electroform it!) *PLEASE NOTE: This is different than the alcohol based graphite paint that I also offer* ► ► ► ► ► ► ► ► ► ► ► ► Graphite Conductive Paint COPPER ELECTROFORMING: - Water based graphite conductive paint 2 oz jar- Stir very well before each use, do not violently shake - Brush, dip, or spray on - Thins with Distilled Water (NOT tap or bottled) - Wear protective gloves - Apply 2 - 3 coats, 10 to 20 min between each coat of paint - Use a sealant or lacquer before applying paint to organic and porous items - 24 hour cure time - Cleans with soap and water IMPORTANT USAGE NOTE:► ► ► ► ► ► ► ► ► ► ► ►Thoroughly stir conductive paint from the bottom of the jar until smooth. Conductive particles will settle again within 8-12 hours, so stir well each time before using this paint. Do not vortex or violently agitate/shake the paint jar, as air entrapment or foaming may cause separation.► ► ► ► ► ► ► ► ► ► ► ►

• 2oz Jar Water Based Graphite Conductive Paint
• For COPPER ELECTROFORMING- not electroplating other metals
• Thoroughly stir conductive paint from the bottom of the jar until smooth. Conductive particles will settle again within 8-12 hours, so stir well each time before using this paint
• Use with CORRECT type of ACID COPPER ELECTROFORMING Solution, uncoated cathode wire, copper anode, and proper power supply settings (0.1 amp per sq inch) for results
• Metering WET material will not read. Dry layers only