Vanquish Products Currie Portal F9 SCX10-II Rear Axle Clear Anodized VPS08361

Overview: The F9 Portal axles create extreme amounts of ground clearance under the center of your axle, increasing the clearance by 1/2"+ (13mm). This provides the equivalent of a tire over 1 inch taller than what is on your vehicle. The advantage of the Vanquish Currie F9 Portals is the gear reduction inside the portal (1.67:1) which can be adjusted with optional gear sets (1.4:1 Overdrive*). By adding reduction at the portal, less torque is transferred through the other upstream components in the drivetrain. These axles are a direct replacement to any Axial AR44 axle, using all stock links. These axles come with all parts needed to assemble a full rear axle. Requires the use of a 350 SLW hub or greater on Vanquish 1.9 wheels, Incision wheels will require a #4 or greater. Other wheel manufacturers offsets will vary. Axles must be used in pairs, you cannot run a front portal axle without a rear and vice versa. Overdrive gear sets are recommended for use in the front axle only. Features: Portal box integrated into the rear housing for the most clearance at the axle ends possible and a more scale appearance Gear reduction in the portal of 1.67:1 (18/30), Optional Overdrive Ratio* of 1.4:1 (20/28) Included Vanquish AR44 machined gear set Overall axle reduction of 6.26:1 with stock portal ratio 13mm increase in ground clearance Hex to hex width of 7

• Included Vanquish AR44 Machined Gear Set
• 13mm Increase In Ground Clearance
• Complete Fast Eddy Bearings Kit
• Licensed By Currie Enterprises
• Uses All SCX10-II Linkage