The ROP Shop OEM Everflo 1.0 GPM 12V Diaphragm Pump EF1000 with 3/8" NPT Ports & Wiring Harness 33-103233 for Agricultural Sprayers & Fluid Transfer

OEM Everflo 1.0 GPM 12V Diaphragm Pump EF1000 with 3/8" NPT Ports & Wiring Harness 33-103233 for Agricultural Sprayers & Fluid Transfer. Please review all product information to ensure that this product is compatible with your unit. Our staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us...we get it. Let's work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for: ▪ Model and/or Sub-model ▪ Spec and/or Type Number ▪ Code and/or Serial Number ▪ Year ▪ Engine Horsepower. Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

• OEM Everflo 1.0 GPM 12V Diaphragm Pump EF1000 with 3/8" NPT Ports & Wiring Harness 33-103233 for Agricultural Sprayers & Fluid Transfer
• Specs - Max Pump Pressure: 40 PSI. Open Pump Flow: 1.0 GPM. Pump Voltage: 12 VDC. Max Pump AMP: 4.0. Pump Ports Type: 3/8" (9.5mm) NPT. Self Priming up to 4 Feet. Standard Mount Pattern. Wire Harness Length: 8'. Harness Gauge: 16. Harness Amps: 7 max. Harness Connector: 2-pin. Refer to images 2 & 3 for more information
• Includes - (1) Everflo 1.0 GPM, 12 Volt, Diaphragm Pump with 3/8" NPT Ports & Manual/Installation Instructions, (1) Wire Harness/Power Cable with Clamps; comes as shown in the first image
• This pump is intended for use in spraying agricultural solutions and other non-flammable liquids. The pump is intended for use in spraying solutions in liquid form ONLY. The pump is NOT intended for use in spraying solutions dry or aerosolized form, or for use with fumigants
• It's recommended that standard plastic threaded fittings are used to plumb the inlet/outlet ports; the use of metal fittings or rigid pipe is NOT recommended. Restrictions on the inlet may cause a loss in performance. Inlet pressure must NOT exceed 30 PSI. Can be mounted in any position