SCULPFUN S9 Laser Engraver with TS1 Touch Screen for Laser Cutter, 90W Effect Laser Engraving Machine, Cut 15mm Wood, Ultrafine Engraving, Working Area 410 x 420 mm

Specification: Product model: SCULPFUN S9+SCULPFUN TS1Information of SCULPFUN S9 laser engraving machine Engraving size: 410*420mm / 16.1*16.5in Color: Blue Plug mode: US plug Engraving material: wood, bamboo, cardboard, plastic, leather, PCB, alumina, 304 stainless steel, ceramic, dark stone. Cutting material: wood, acrylic board, cardboard, non-woven fabric, bamboo, some plastic board. Laser effect power: 90W (similar to 90W COz laser cutting effect) Power consumption: 30W Laser class: IV Laser output: 5000mW Diode laser output power: 5.5-6W Laser wavelength: 455±5nm Engraving accuracy: 0.01mm Focusing mode: fixed focus laser + sliding device Laser protection cover: the purple filter cover on the laser can protect the user's eyes and prevent animals from contacting the laser point. Operating software: for LaserGRBL, for LightBurn, for LaserGRBL, for LightBurn, for Benbox, for GrblController, for LiteFire, Support Windows and MAC operating systems. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats. Data transfer mode: USB connection Power supply: International standard power input: 100-240V AC, 50/60Hz Output: 12V 5A Net weight of equipment: 3.0kg Packing weight: 4.4kg Packing size: 615*345*130mm / 24.2*13.6*5.1in Certification: CE FCC RoHS FDA ICE certificationInformation of SCULPFUN TS1 touch screen for laser engraver: Product Material: ABS+PC Screen Size: 3.5 inches Screen Material: Capacitive Touch Screen Screen Resolution: 480*320 Product Size: 126*89*25mm Product Weight: 130gMatters needing attention: 1. For detailed machine instructions and parameter settings, please refer to the manual. 2. Install laser protective cover when operating laser engraving machine; Wear goggles if not properly installed. 3. Do not touch the laser with your hands. Otherwise, your hands may be burned. 4. Please avoid strong impact on the machine. 5. Children under 14 years of age are not allowed to use this product. Adult supervision is required for children over 14 years of age. 6. Do not apply the laser directly to any specular reflection object, this may cause injury to the operator or burn the laser.Packing list: 1 x X-axis component 2 x X profiles 2 x Y profiles 1 x Control box component 3 x Supporting leg 1 x Laser component 1 x 12V 5A power adapter 1 x Power cord 1 x USB cable 1 x Step 1-5 screw mounting kit 2 x Belt 1 x T-type M5 Hexagon socket screwdriver 1 x L-type M4 Hexagon socket screwdriver 1 x L-type M3 Hexagon socket screwdriver 1 x 8-10mm screw wrench 10 x Ribbon 1 x Brush 1 x Laser protective goggles 1 x 3mm thick 10x10cm wood chip 1 x 10mm thick 10x10cm wood chip 1 x A4 size steel tabletop protective pad 1 x Touch Screen 1 x Power Cable 1 x SD Card 1 x Card Reader 1 x User Manual

• 【High Performance 90W Laser】The S9 laser engraver adopts 5.5-6W laser module, and features 0.06mm ultra-thin laser focus, which has higher energy density and stronger. With an engraving accuracy of 0.01mm, the S9 is suitable for cutting and engraving a wide range of materials, including stainless steel, ceramic, 10mm acrylic and Wood up to 15mm thick.
• 【High Precision Engraving】The SCULPFUN S9 has an ultra-fine and high precision engraving line of 0.08mm, as thin as a hair. After engraving, the image is very clear, and if you look closely, you can even see the layer line. In addition, there are precision graduation marks on the X and Y axes, allowing you to quickly measure the engraving size and further improve the engraving accuracy.
• 【Wide Compatibility】The SCULPFUN S9 laser engraving and cutting machine is compatible with various precision engraving software. Such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support PWM mode engraving, support Windows system, also support MAC system (LightBurn), engraving file format support JPG, PNG, DXF, SVG, G-Code, NC, BMP, etc. In addition, S9 is compatible with SCULPFUN TS1 touch screen for laser engraver.
• 【Information about TS1】The SCULPFUN TS1 touch screen offers offline engraving and WiFi connectivity. Simply copy the engraving to the SD card on the touch screen and then complete the engraving job offline through this touch screen. It also gives the laser engraver WiFi capability, which, when used with the SCULPFUN mobile app, enables real-time cutting without the need for a computer. And it can be compatible with S9 laser engraving machine, just connect the USB cable from the engraving machine to the touch screen, then you can use it, which is convenient and fast.
• 【Easy to Install】The all-metal frame design and metal laser engraving make the desktop laser engraving machine more sturdy, stable and durable. Fixed holes are reserved on the four feet and body to install the machine and data cables. It is easy to assemble and usually only takes 10-20 minutes to complete the installation and setup. Suitable for beginners, no complicated assembly steps are required!
• 【Laser class: IV, laser output: 5000mW】