S3227 Outboard Marine Fuel Filter Assembly Fuel Water Separator Marine Engine Boat(Type 1)

SeparatorsProduct Description1. Loosen the self-venting drain plug and drain the water from the bowl into a container.2. Tighten the drain hose.3. Use the filler ball to fill the filter with fuel.4. Start the engine and check to make sure there are no leaks.Model: S3227replace1. Loosen the self-venting drain plug and drain the waste liquid into a container.2. Remove the filter with the bowl attached from the mounting bracket.3. Remove the filter bowl from the strainer and clean the O-ring seal on the filter bowl. The filter bowl is reusable* Do not discard.4. Lubricate the O-ring with oil or grease and install on the bowl.5. Install the bowl onto the new one and tighten it finger tight.6. Lubricate the filter top seal with oil or grease.7. Fill the filter/cup assembly with clean fuel and install it onto the mounting bracket, finger tight.8. Start the engine and check to make sure there are no leaks.Package Contents:Type 1: 1Pc* filter elementType 2: 1 piece* Filter element with bowlType 3: 1*oil-water separator, 2*screwsNote: Shooting light and different monitors may cause the color of the item in the picture slightly different from the actual item.The measurement error is +/- 1-3cm.Other Part Number: S3227Country/Region of Manufacture: ChinaInterchange Part Number: S3227Material Type: AluminumProduct weight: 1.2KGProduct height: 100mmItem width: 101mmProduct length: 235mmManufacturer Part Number: S3227

• Separators