Red Head PF4-314 Tapcon Phillips Flat Head 1/4-Inch by 3-1/4-Inch Anchor (100 per Box)

From the Manufacturer Red Head Tapcon Phillips Flat Head 1/4 X 3-1/4 Inch Anchor is the "original masonry" anchor that cuts its own threads into concrete, brick, or block. Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It is essential to use the Condrive tool and the correct drill bit to assure consistent anchor performance. A Phillips Flat Head style is available when flush seating is necessary in countersink applications. The Climaseal Coating is standard on all Tapcon anchors to provide extended corrosion resistance. Advanced thread form cuts into masonry materials for greater stability and pullout values Lengths of Tapcon Anchors range from 1-1/4 inch to 4 inch in 3/16 inch and up to 6 inch 1/4 inch diameters. Nail-Type Point guides the anchor into the pre-drilled hole, so no hole spotting or inserts are required. These anchors install fast and easily (three anchors per minute), and are excellent for wood to concrete applications. Specs: Fixture Thickness - 1-3/4 to 2-1/4 inches; Bit Length - 5-1/2-Inch inches.

• Cuts it's Own Threads into Concrete
• Fast and Easy Installation - Three Anchors per Minute
• Phillips Flat Head is Available for Flush Seating in Countersink Applications
• Climaseal Coating for Corrosion Resistance
• No Hole Spotting or Inserts Required