Red Head FS-3840 Dynabolt Phillips Flat Head 3/8-Inch by 4-Inch Sleeve Anchor (50 per Box)

From the Manufacturer Red Head Dynabolt Phillips Flat Head 3/8 X 4 Inch Sleeve Anchor feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer. The anchor diameter equals hole diameter, with 1/4 - 3/4 inch diameter anchors available, up to 6-1/4 inch length. The sleeve design improves holding power. These sleeve anchors provides full 360 degree hole contact over large area and reduces concrete stress, with a heavy-loading capacity. They are preassembled for faster, easier installations and can be installed through object to be fastened. No pre-spotting of holes necessary. The anchors are zinc plated and should be installed with carbide tipped hammer drill bits. Available in hex head and six other head styles. Specs: Anchor Diameter and Drill Bit Size - 3/8 inch; Effective Anchor Length - 4 inch; Bolt Diameter - 5/16 inch; Threads per Inch - 18; Min. Embedment - 1-1/2-Inch inch; Max. Thickness of Material to be Fastened - 2-1/2-Inch inch.

• Anchor Diameter Equals Hole Diameter
• Zinc Plated Carbon Steel
• Heavy-Loading Capacity
• Preassembled for Faster, Easier Installations
• Sleeve Design Improves Holding Power