MICROJIG Matchfit Inline Dovetail Ramp Clamps for Track System, Low-Profile, Rotating Heads for, CNC, Routing, and Sleds, Woodworking Tools, 2-Pack, CN-P3K2

Stop designing your work around your clamps. The MATCHFIT Ramp Clamps (2-Pack) liberate you from the limitations of fixed-position T-tracks and dog-hole grids, giving you unlimited clamping freedom across any surface where you can route a dovetail groove. Conventional workholding forces you to compromise. T-tracks lock you into predetermined positions. Dog holes dictate where you can place your clamps. Both require expensive, permanent installation and still leave you reaching for shims, struggling with material lift, or fighting for tool clearance. These clamps work anywhere you route a 14-degree by 1/2" dovetail groove—on workbenches, sleds, fixtures, jigs, or CNC spoilboards. Slide them into position, tighten, and the innovative wedge ramp mechanism engages. Unlike ordinary clamps that only apply downward pressure, the Ramp Clamp delivers both forward and downward force simultaneously, locking your workpiece flush to the surface with zero lift. Even under aggressive routing or heavy chiseling, your material stays perfectly seated. The low-profile clamp head rotates 360 degrees, letting you position it completely out of your tool path. Work tight corners, route along edges, or plane across the entire surface without repositioning clamps. The head stays low enough that it never interferes with routers, planes, CNC bits, or laser engravers—giving you full access to your workpiece from every angle. These woodworking accessories are ideal for woodworkers, hobbyists, and professionals alike. They are engineered to streamline your workflow, enhance safety, and provide unparalleled control over your materials.

• UNLIMITED POSITIONING ALONG ANY DOVETAIL GROOVE: Unlike fixed-position T-track or dog-hole systems, these MICROJIG dovetail clamps slide anywhere along any 14-degree by 1/2" dovetail track you route—position exactly where you need, every time
• WEDGE RAMP MECHANISM PREVENTS MATERIAL LIFT: The innovative wedge applies both forward and downward pressure simultaneously, locking your workpiece flush to the surface with no lifting—even during high-stress routing or chiseling
• 360° ROTATING LOW-PROFILE CLAMP HEAD: Full rotational clearance gives you complete access to the top and corners of your workpiece; these woodworking tools are ideal for tight spaces, edge work, and operations that need unobstructed tool paths
• SECURE HOLD FOR SLEDS, JIGS AND WORKBENCHES: Mount on table saw, band saw, or router sleds to hold material firmly against the fence; these clamps for woodworking also ideal for hand planing, chiseling, sanding, CNC, and laser engraving with zero interference
• ROUTE YOUR OWN CUSTOM TRACKS ANYWHERE: Use any standard 14-degree by 1/2" dovetail bit to create clamping points exactly where your workflow demands; durable USA-made construction