MAMMOTH Car Heavy Duty || Jumper Cable Battery Storage || Wire Clamp with Alligator Wire || Start Dead Battery || Emergency Line Truck Off Road || Auto Car Cables (1000AMP)

♣ Product description♣ Size:1000AMP♣ Instructions: ♣ To reduce the risk of vehicle damage or battery explosion before use. Please read the instruction carefully before use.♣ 1. Connect one RED clamp to POSITIVE(+) terminal of the dead battery and other RED clamp to the POSITIVE(+) terminal of the donor battery. ♣ 2. Connect one BLACK clamp to the NEGATIVE (-) terminal of the dead battery and other BLACK clamp on suitable earth point on the engine block of the donor car.♣ 3. Start the engine of the donor car.♣ 4. Turn on the ignition of the car with the dead battery and start the engine ♣ 5. Once the engine has started ,simply remove the clamp in the reverse order to instruction 2 and 3 above, starting with black clamp first .♣ 6. Check both the batteries have same voltage 7. Ensure clamps are connected to the correct terminals as stated above.

• Auto Car Jumper Cables
• Clamp to Start Dead Battery
• Connect one RED clamp to POSITIVE(+) terminal of the dead battery and other RED clamp to the POSITIVE(+) terminal of the donor battery
• Mutli-stranded Copper for High Conductivity Copper Plated Clamps Heavy Flexible Insulation 1.70 meter 1000 amp jumper cables to start car, truck and other vehicle in case of a dead battery or cold diesel vehicle battery in winter