Magnate M132E12T3 Carbide Tipped Bandsaw Blade, 132" Long - 1/2" Width, 3 Tooth, 0.025" Thickness

All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas. Please note: The images shown, which represent a single blade, are for general reference only and may not exactly match the blade you receive. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct the orientation. Custom Bandsaw Blades Available: We offer blades of any length and type upon request to fit your bandsaw. Please consult your owner's or operation manual to confirm the correct blade length, width, and thickness for your machine. Safety Warning: For packaging, all blades are coiled like a spring and may snap open suddenly during coiling or uncoiling. Always wear heavy-duty leather gloves and proper eye and body protection, and use extreme caution. Serious injury may result from improper handling. Refer to your bandsaw’s owner’s manual for complete safety instructions. Important: Disconnect power before installing, removing, or measuring blades. If you are unsure of your bandsaw blade’s correct length, follow these steps: 1) Check the owner’s manual for blade specifications, including length, width, and thickness. 2) Refer to previous invoices for blade details if the manual is unavailable. 3) Measure your old blade using a soft cloth measuring tape: Uncoil the blade carefully, then press the tape tightly along the back edge of the blade and measure its full length. 4) Measure on the floor: Mark a starting point on the blade and on the floor, roll the blade in a straight line until the starting point touches the floor again. Measure the distance between the two points. 5) Cut the blade in half and lay it flat on a level surface to measure its length accurately.

• 11' (11 feet) Long
• 3 TPI For cutting wood from 1" to 6" (taller if fed slowly) or steel from 1" to 4"