J.V. Converting JVCC SCF-01 Low-Density Single-Sided PVC Foam Tape Closed Cell, 1/2 in. x 75 ft. x 1/8 in. Thick (Black)

JVCC SCF-01 1/8 in. Low-Density Single-Sided PVC Foam Tape is an economical, closed-cell, general-purpose foam tape coated on one side with a high-performance acrylic adhesive. The adhesive on this single-sided foam product is on the exposed side of the tape when you unwind it from the roll; the release liner is pulled away from the non-adhesive side of the tape. A good combination of flexibility and conformability with strength and wear resistance. Also has excellent weatherability and chemical resistance. Used in applications requiring positive seals on irregular surfaces or when flexibility and conformability to seal tight radius curves are critical considerations.JVCC SCF-01 Foam Tape is used extensively in the automotive, HVAC and construction industries to provide air & weather-tight seals; for gasketing, cushioning, vibration control in speakers, vehicles, electronic components and door frames. Also for filling and sealing gaps around windows, doors, and car/SUV tops for better insulation. It is a clean, waste-free substitute for liquid sealants. Please make note that this a closed-cell foam product is not soft like an open-cell foam product would be. It also complies with European RoHS directive 2002/95/BC. Country of Origin: Italy. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 1/8 in. thick foam x 12mm x 75 ft. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

• JVCC SCF-01 1/8 in. Low-Density Single-Sided PVC Foam Tape is a low density, closed-cell PVC foam tape. It is an economical, general-purpose foam tape coated on one side with a high-performance acrylic adhesive. The adhesive on this single-sided foam product is on the exposed side of the tape when you unwind it from the roll; the release liner is pulled away from the non-adhesive side of the tape.
• A good combination of flexibility and conformability with strength & wear resistance. Also has excellent weatherability and chemical resistance. Used in applications requiring positive seals on irregular surfaces or when flexibility and conformability to seal tight radius curves are critical considerations.
• Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
• Adhesive: acrylic. Carrier/Backing: low density closed cell PVC foam. Release Liner: white siliconized paper. Service/Operating Temperature: -4?F to 176?F. Density: 6 to 10 pounds per cubic foot
• Tensile strength: minimum 15 psi. Force to compress 25%: 3.0 to 4.0 psi. Compression deflection: 1.0 to 2.5 psi. Standards Met: European RoHS directive 2002/95/BC. Core: 3 inch diameter