Homacer Black Rustic Ceiling Mount Double Track Bypass Sliding Barn Door Hardware Kit, for Two/Double Doors, 8ft Long Flat Track, Interior Use Only (Doors are not Included)

HOMACER aims to provide the best value products and services to save your time and money when you think of installing a sliding door at your home! Pre-install Notice:1. Only the hardware is for sale, doors are not included.2. The hardware package only has lag bolts for wooden ceiling studs. 3. Our sliding barn door hardware kit is compatible with door thickness from 1 1/8 inches to 1 3/4 inches. If you have thinner or thicker door, please contact us to purchase for the correct length of the hex bolts of the hangers or you can get them from your local hardware store. 4. If your ceiling stubs are NOT 16“ apart, you’d better put a ceiling board that is at least 1.5“ thick 3“ width and then attach the hardware to the ceiling board. 5. With the hardware mounted to the ceiling, calculation of your door height is a bit different from regular sliding barn doors that mount to the wall. The necessary spacing from the top of the door to the ceiling is 6-3/4in (includes the space for floor guide) for the mounting hardware.6. All tracks that are 7.5FT and under come in one piece. All tracks that are 8FT and above are connected by two tracks using a junction plate. Thus, the spacing between the middle two holes may not be 16 inches. The 18FT track is connected by three 6FT tracks and the 20FT track is connected by three 6.6FT track.

• 👍NO CLEARANCE LIMIT & TRUE BYPASS. No wall space above your doorway? Need to divide up a room? Little to no clearance above the opening? All of those situations can be solved with our ceiling mounted hardware kit. Your door placement is no longer limited by the lack of clearance. With double tracks, each of the 2 doors slide independently on their own track for a true bypass.You can add on additional rollers to accommodate for additional doors. Overall hardware weight limit is 220lbs.
• 😊ADJUSTABLE SPACING. No longer limited by how far the track sits away from the wall, our ceiling mounted hardware can be adjusted to how far the door sits away from the opening. Bolts included will fit for door thickness from 1-3/8in to 1-3/4in. The maximum door thickness that can be used is 1-3/4in. Thinner doors will require shorter hex bolts or spacer extenders which can be purchased separately from us. Doors over 1-3/4in thick CANNOT be used.
• 🔨EASY TO INSTALL. The steps for installation has been reduced with our brackets coming as one solid piece. You will also receive a step by step installation manual with U.S. standard measurements, simple instructions and informative diagrams. All the brackets and bolts need to be installed into ceiling studs. DO NOT install into drywall. If the ceiling studs do not line up, consider mounting a ceiling board of at least 1-1/2in thick and minimum 5-1/2in wide.
• ⏰DOOR HEIGHT CALCULATION. With the hardware mounted to the ceiling, calculation of your door height is a bit different from regular sliding barn doors that mount to the wall. The necessary spacing from the top of the door to the ceiling is 6-3/4in (includes the space for floor guide) for the mounting hardware. Door height = ceiling height - 6-3/4in. If a ceiling board is used, please use the following calculation instead. Door height = ceiling height - ceiling board thickess - 6-3/4in.
• 📞VARIOUS TRACK LENGTHS AND FULL SIZES. We offer anywhere from 4ft up to 20ft. The spacing between each pre-drilled holes on the track is 16in apart to match studs. Our 7.5ft and shorter tracks all come as one full piece. 8ft and longer will come as two or more pieces joined with a junction plate, therefore the middle section where two tracks join may not be 16in apart. A ceiling board will be required if the holes on the track do not line up with your studs.