HMP300 Power Integrated Protection Integrated Protection Module

Electronic Engine Control1 OVERVIEWHMP300 power integrated protection module integrates digital, intelligent and network technology,and is used for collecting generator-set data (voltage, current, power and frequency) and related actionoutput for data errors to protect the device. It fits with display, optional Chinese and Englishbilingual interface, and it is reliable and easy to use.HMP300 power integrated protection module adopts micro-processor technology with preciseparameter measuring, fixed value adjustment, set value adjusting functions etc. All parameters can beconfigured from front panel or through LINK interface via PC. It can be widely used in all types ofmarine/land electrical device with compact structure, advanced circuits, simple connections and highreliability.2 PERFORMANCE AND CHARACTERISTICSMain features are as below:132x64 display with backlight, selectable language interface (Chinese and English), push-buttonoperation.Equipped with LINK communication port; Through LINK interface on PC, data and parameters can bemonitored and adjusted.Equipped with CANBUS port, which can connect with HMC9000/HMC6000 module to realize powerand engine data collecting and display at the same time.Differential protection function, and controller will issue related alarm information after differentialprotection is active.Protections for over/under voltage, over/under frequency, reverse power, over power and overcurrent.Harmonic test function, and each phase voltage/current harmonic distortion rate can be tested.Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems withfrequency 50/60Hz.Collects and shows 3-phase voltage, 3-phase current, frequency and power parameters.GeneratorLine voltage (Uab, Ubc, and Uca)Phase voltage (Ua, Ub, and Uc)Frequency HzLoadCurrent Ia, Ib, Ic A (unit)Each phase and total active power P kW (unit)Each phase and total reactive power Q kvar (unit)Each phase and average power factor PFParameter setting function: users are allowed to set and change parameters and parameters shallbe stored in internal FLASH memory and cannot be lost even in case of power outage; most of themcan be adjusted using front panel of the controller.Wide power supply range (8~35) V, suitable for different starting battery voltage environment.All parameters apply digital adjustment, instead of conventional analog modulation with normalpotentiometer, improving whole reliability and stability.Module is mounted on the 35mm guide rail.

• Electronic Engine Control
• HMP300 Power Integrated Protection INTEGRATED PROTECTION Module