Grouting Applicator Machine Electric Grout Mortar High Pressure Injection Pump Grouting Tool Caulk

High pressure pouring machine is the building and build a chemical grout sealing, structural reinforcement of specialized equipmentWorking pressure: instantaneous maximum pressure up 15000Psi, flow rate of 0.74 liters / minute, chemical pulp can enter more than 0.02mm depth of 1000mm hairline cracksMachinery components must locking screws, drill must be fully inserted into the holder, not loose, high-pressure and high-pressure pipe and the main body perfusion machine gun connections must be wrapped after the raw material belt tightened to prevent leakage of slurryNotice1.Machine during transport will be shaking before use, to tighten all the screws again2.Non impregnated with the slurry particles ingredients3.Pressure does not prohibit the use of the viscosity of the liquid, pressure testing machine to test the use of oil and otherMachine cleaning methodWash the machine in time after use, so as not to cause machine blockage.1. Before the construction, please prepare the thinner of the cleaning machine. After the construction, the machine should be cleaned, such as Tianna water, pine perfume, banana water, etc.2, cleaning method: pour the thinner into about 500 ml into the barrel of the machine, put the gun head into the barrel, clean the boot cycle, wash for a while, squirt, pour in new thinner, In the same way, the machine must be cleaned, and the second time the diluent can be used as the first cleaning after the next construction. After the thinner is ejected, pour the oil into the oil. In the same way, it will be circulated for a while and sprayed into the oil drum. This will discharge the thinner and protect the sealing parts inside the machine.3. During the next construction, pour the slurry into the bucket, start it first, and drain the oil remaining in the machine. When the slurry comes out, start grouting.

• 【Scope of Application】The high pressure grouting machine is used for the building and build a chemical grout sealing, structural reinforcement of specialized equipment.
• 【High Pressure】: instantaneous maximum pressure up 15000Psi, flow rate of 0.74 liters / minute, chemical pulp can enter more than 0.02mm depth of 1000mm hairline cracks.
• 【High-precision Pressure Gauge】 The pressure situation can be grasped at any time through the pressure gauge, and the slurry can be effectively poured into the deep micro cracks.
• 【Stable and Durable】 All copper core motor, strong power, non-slip leather pad can ensure more stable construction process.
• 【Long Service Life】The pump is made of high-strength alloy, strong and durable.High pressure explosion-proof tube, durable.