GEEKRIA for Creators Microphone Shock Mount Compatible with Rode NT1-A, NT2-A, NT1000, NT2000, NTK, K2, Mic Anti-Vibration Suspension Adapter Clamp Mic Holder Clip (Champagne/Metal)

The Geekria for Creators shock mount is designed to provide adequate protection against noise caused by movement. Suspension Shockmount Compatible Microphones: - Compatible with Rode K2, NTK, NT1-A, NT2-A, NT1, NT1000, NT2000, Procaster, Podcaster mic shock mount. Note: - Microphone shock mount only, device not included. - Comes with a 3/8" to 5/8" screw adapter matching most desk mic arm stands, Mic boom arms, or table mic stands. - The round iron sheet can be used to turn the adapter, when the adapter install are too tight and there is no force point to screw down. Anti-vibration spider shockmount has 5 different size bottom screws, which can compatible with multiple microphones. Suitable for the microphone has a thread and thread diameter bigger than 20mm to tighten the mic to the shock mount.

• The heavy-duty elastic bands suspend the mic in the shock mount center for isolation from noise, shock, and vibrations.
• Designed to help prevent vibrations and noise through a mic stand, or boompole from reaching suspension shockmount.
• Rubber mat between the metal bolt and microphone attaches that prevent microphone scratches and tighten.
• The metal shock mount is designed to compatible with Rode K2, NTK, NT1-A, NT2-A, NT1, NT1000, NT2000, Procaster, Podcaster mic shock mount.
• Package content: 1 x Champagne metal spider shock mount, 1 x 3/8" to 5/8" metal screw adapter, 5 different size bottom metal screws.