DC Brushless DC Brushless Mini Submerged Booster for Aquarium Large 12V BS 60B Engineering Plastic,

Specification:Item Type: DC Brushless Material: Engineering plasticUses: DC water submersible pumps, water cooled pumps for electric vehiclesModel: JT‑60BRated : 2500m³/hVoltage: DC12VCurrent: 3.72APower: 45WStarting Voltage: 8VProof Rating: IP68Rated Head: Approx. 8meter / 26.2ftUse Environment Temperature: -20℃~80℃Use Environment Humidity: Below 90%Use Medium Temperature: -20℃~100℃Use Medium: Water, alcohol, and other liquids with good fluidityUse Place: Treatment, equipment, electrical appliances, etc.Life: ≥30000HInsulation Withstand Voltage Test: 1500V for 60 secondsNoise: ≤40dB Housing Material: PA66 + 30% glass Magnet Material: Plastic magnetWire Frame Material: Nylon material PA66Rotor Material: GraphitePower Cord Material: PVCShaft Material: CeramicPackage List:1 x DC Brushless Note:1. The is a DC , and the voltage must be DC power supply (such as batteries, DC power supplies marked with DC, transformer), and the voltage is within the specified voltage range before can be used.2. The has its own water off function. In the absence of water, the pump will automatically stop after 1 minute of rotation. After adding water, re insert the power supply to operate normally.3. The has a jam device. When impurities enter the pump body during use, after the rotor is jammed, the will automatically stop running. After the power is removed to the impurities, the power can be re energized.3. It is strictly forbidden to use in strong and strong solutions.4. It is strictly forbidden to use in liquids with impurities and particles larger than 0.25MM. If the water is too dirty, up the impurities in the pump room in time.5. The pump itself is not equipped with a power supply (transformer). If a power supply is required, it must be equipped with a power supply only if it is marked \" + power supply\". If there is no power supply marked, all are pumps! 6. The is a DC , voltage DC24V ,with DC24V power supply, voltage DC12V with DC12V power supply can be used. (Can not use 220V AC voltage directly, only the pump with power supply can be used directly by plugging in 220V)