Continuously Variable Speed Brake Lathe Am-552 For Repairing The Drum Or Disc From Mini Car To Heavy Trucks(110V)

Continuously Variable Speed Brake Lathewhat is the selling point for AM-552? One of the common problems when lathing large brake disc is the vibration and chatter transfer that directly affects the tool-tip and leaves an imperfect cut on the disc surface. AM-552 Brake Lathe is specifically designed these problems by controlling variable-speed driver. For testing, if you stood back and watched a brake lathe machine working on finish cut on a disc, at this moment if you drop a hammer on the floor next to the lathe, you would see a noticeable degradation of the cut at the moment of impact. Vibration causes frequencies which get transferred to the finish cut.This vibration effect is not obvious in normal size disc, but can be detected in a big disc more than 400mm. There are several ways to it, the best and easy way is to reduce the speed of disc turning. AM-552 adopted the latest technology of "Variable-frequency Drive" than can control and lower the driver speed continuously, giving you the best and smoothest disc lathe.General View1. AM-552 can work with various types of vehicles directly for lathing.2. It is upgraded and remodelled according to customer-oriented perspectives, which can make it easier and safer when resurfacing.3. It can completely solve the problem of brake pedal dithering, brake disc rust, brake deviation and brake noise based on the actual axis of rotation by lathing the defective brake disk in a professional way.4. contain switch to shut off the machine automatically when finish the lathing of the disk.5. speed switch to adjust the rotation speed depending on the brake disk type to assure the best lathing.6- Save cost, shorten the repair time, and reduce the client's complaint.Technical specifications:Product name: Brake lathe dual functionsModel AM-552Working height min/max:1mDrive speed:150rpm with speed control switch.Electrical specifications:220v/60HzAmbient temperature range: -30 to 60cCar brake disc max diamater:500mmCar brake disc thickness:6-40mmCutting accuracy:0.00-0.003mmBrake disc runout:0.00-0.005mm with Auto stop switchBrake disc thickness variation:0.005-0.01mmBrake disc surface roughness: 1.5-2.0mmWeight:135kgsSpecificationitemvalueTypeCode ReaderVoltage110v/220vDrive speed150rpm with speed control switchAmbient temperature range-30 to 60cCar brake disc max diamater500mmCar brake disc thickness6-40mmCutting accuracy0.00-0.003mmBrake disc thickness variation0.005-0.01mmBrake disc surface roughness1.5-2.0mmWeight135kgsPacking & DeliveryUse : Not TelecommunicationItem Weight : 138kgItem Height : 23inchItem Width : 21inchItem Length : 23inchVoltage : standardModel Name : Continuously Variable Speed Brake Lathe Am-552Software Version : Continuously Variable Speed Brake Lathe Am-552Hardware Version : Continuously Variable Speed Brake Lathe Am-552Item Type : Electrical Testers & Test LeadsPower (W) : standardProduct name : Brake lathe dual functionsModel : AM-552Working height min/max : 1mDrive speed : 50rpm with speed control switchElectrical specifications : 220v/60HzCar brake disc max diamater : 500mmCar brake disc thickness : 6-40mmCutting accuracy : 0.00-0.003mmBrake disc thickness variation : 0.005-0.01mmBrake disc surface roughness : 1.5-2.0mmWeight : 135kgs

• Continuously Variable Speed Brake Lathe Am-552 For Repairing The Drum Or Disc From Mini Car To Heavy Trucks
• Superior Heat Dissipation: Multi-alloy Construction And Application-specific Vane Configuration Of The Front Rotors Optimize Cooling, Improve Performance, And Reduce Fading Of Brakes Reduced Noise And Vibration: Front Rotor Engineered With A Non-directional Ground Finish And Balanced Design To Help Dampen Noise, Vibration, And Harshness (NVH). This Disc Brake For Your Vehicle, SUV, Or Sedan Will Provide A Steady And Enjoyable Ride Longer Brake Pad Life: Smooth Rotor Surface Minimizes Thickness