AIM-TTI INSTRUMENTS TF930 3GHz Universal Counter Timer USB

TTi TF930 30 3GHz Universal Counter USBFrequency, period, pulse width, frequency ratio duty cycle, and event counter modesDC to 3000MHz range, 0.001mHz resolution, TCXO TimebaseHigh impedance measurement up to 125 MHzAC or DC coupling, 1M/50Ohm selection, polarity invert 3GHz Universal Counter USB The TF930 and TF960 use a high-quality temperature compensated internal frequency reference (TCXO) which has a low aging rate and is stable to within ±1ppm over the full temperature range. Its short warm-up time allows accurate measurements to be made even under portable battery-powered conditions. An External Reference input is provided and changeover from the internal time base is automatic when an external reference standard is connected. USB interface provides full remote control and readback. High Resolution For frequency, period and frequency ratio functions the instrument uses a reciprocal counting technique to provide high resolution at all frequencies. Eight significant digits of answer are produced in a 1 second measurement time, nine digits in 10s and ten digits in 100s with a granularity of less than 2 counts in the least significant digit.Flexible Signal ConditioningInput A has configurable coupling (AC or DC), input impedance (1MW or 50W), attenuation (1:1 or 5:1), threshold (fully variable) and active edge, and can be used for frequencies in the range 0.001Hz to >125MHz. Input B is a nominal 50W input for frequencies in the range 80MHz to > 3GHz.Input C (TF960 only) uses a standard N connector and has a nominal 50W input for frequencies in the range 1.8GHz to > 6GHz.Multiple Measurement FunctionsThe TF930 and TF960 can measure frequency, period, pulse width, duty cycle and frequency ratio, as well as event counting (totalise).Remote Control and Read-Back via USBThe TF930 and TF960 incorporate a USB interface which allows it to be remotely controlled using RS232 protocol via a computer’s USB port

• TF930 3GHz Universal Counter USB
• Frequency, period, pulse width, frequency ratio duty cycle, and event counter modes
• DC to 3000MHz range, 0.001mHz resolution, TCXO Timebase
• High impedance measurement up to 125 MHz
• AC or DC coupling, 1M/50Ohm selection, polarity invert