50W Permanent magnet DC motor 12V/24V miniature DC speed regulating motor 63mm DC high speed silent motor 8mm shaft diameter - (Speed(RPM): 6000rpm, Voltage(V): 24V)

Motor use precautions:1. Confirm that the motor voltage is correct before use. If it is a DC motor, confirm whether the power supply current is sufficient.2, can not be overloaded, the load torque can not exceed the rated torque of the motor, the force of the shaft can not exceed the axial and radial allowable force of the shaft, the measured current of the motor after the load is addedIn order to exceed the rated current, the general motor must be equipped with a fuse to avoid overloading the motor.3. Do not store or operate in high temperature or humid environment, and do not place in corrosive gas, which will reduce the motor effect.4. When soldering the motor terminals of the positive and negative poles of the power supply, the temperature of the soldering iron should be 340 C 40 C, and the heating time should not be deformed within 3 seconds. In the work, let the solder point flow into the motor or break the end of the wire. Motor function decline5. When installing the motor, pay attention to whether the screw is too long, and prevent the long screw from colliding with the parts inside the motor.Specifications:Motor Diameter: about 63mmMotor Body Length: about 108mmOutput Shaft Diameter: about 8mmOutput Shaft Length: about 30mmOutput torque 1500g.cm-2520g.cmNo-load speed 2000-6000r/minRated speed 75% of the no-load speedWeight: about 1200g

• Speed(RPM): 6000rpm, Voltage(V): 24V