32.6CC Gasoline Hammer Drilling Machine, 3-in-1 2 Stroke Gas Powered Demolition Jackhammer Concrete Breaker Rock Drill for Crushing, Chiseling, Digging

DescriptionThe hammer machine is made of premium aluminum and plastic with high strength. The three functions (hammer/drill/pick) can meet your various needs and the powerful engine can promote your efficient work. It is an ideal choice for electricians, carpenters, etc.DetailsHeat Dissipation Holes: The heat dissipation holes on the sides can dissipate heat in time and prolong the service life of this product.Fuel Tank: The large fuel tank (0.9L) can avoid frequent adding. Meanwhile, the semi-translucent design is convenient for you to observe the remaining fuel quantity and add fuel in time.Muffler: The internal silencer can reduce the noise (≤104dB) when in use to protect your hearing.ApplicationsHammer Function (Drilling While Hammering)Scope of Application:This applies to drilling holes in concrete, floors, brick walls, stones, and solid walls. It is suitable for electricians and carpenters.Pick Function (Hammer Without Drilling)Scope of Application:It is suitable for crushing, chiseling, digging, grooving, cutting, and other operations on concrete, masonry structure, and asphalt pavement.SpecificationColor: BlackMaterial: Aluminum, PlasticStyle: ModernSurface Treatment: Painted ProcessAssembly Required: YesPower: 1200WDisplacement: 32.7CCEngine Type: Single Cylinder, Air Cooling, 2-strokeImpact Frequency: 3200min-1Impact Energy: 30JMax Torque and Speed: 1.5N.m/5000rpmFuel Mixture Ratio: 25:1 (Gasoline: Motor Oil)Fuel Tank Capacity: 0.9L/0.2gal/30OzFuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per HourMax Drilling Diameter: 40mm/1.5inchStarter System: Hand Pull StartNoise: ≤104dBNet Weight (Exclude Drill): About 10.5kg/23lbsProduct Size (L*H): 63*24cm/24*9inchEngine Size: 36*32mm/14*12inchDrill Size: 22*350mm/0.8*13inchPoint Chisel Size: 18*350mm/0.7*13inchFlat Chisel Size: 16*280mm/6*11inchAuxiliary Handle Length: 13cm/5inchInstallation1. Press down the collet.2. Put in a drill bit or chisel.3. Release your hand.4. The installation is complete.Notes1. Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder.2. Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally.3. Please add lubricating oil regularly to ensure strong power.4. Please do not touch the muffler exhaust hole to avoid scalding.5. The mixing ratio of gasoline and engine oil is generally 25:1, but due to the difference of engine oil quality in different regions, we recommend the ratio of 20:1. Please do not use cheap inferior engine oil.6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.Package Included1* Hammer Drilling Machine3* Drills1* Point Chisel1* Flat Chisel1* Fuel Tank1* FunnelOther Accessories for Assembly

• Strong Power: The two-stroke engine with high power (1200W) and large displacement (32.7CC), as well as an enlarged thick-walled cylinder, can achieve a high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate concrete, bricks, rocks, etc with a high speed (5000rpm).
• 3-in-1 Functions: Equipped with three drill bits and two different chisels, it can be used for hammer, drill, or pick by adjusting the knob on the side to meet your diversified needs .
• Saving Fuel: The built-in carburetor can fully atomize fuel to decrease its consumption rate to save costs.
• Good Filtering Effect: The built-in air filter can well filter impurities in gasoline to reduce engine consumption and extend its service life.
• Easy to Use: The wireless design and light weight can improve the flexibility of operation. You can pull the rope to start the machine. Besides, the throttle switch, one-button flameout switch, and anti-skid auxiliary handle allow for convenient use.