3 In 1 Gas Powered Jack Hammer 33CC 2 Stroke Demolition Jack Hammer Concrete Breaker Chisel Drill Gasoline Rock Hammer Drilling Machine

Specification:Color: BlackMaterial: Aluminum, Silicon and PlasticStyle: ModernSurface Treatment: Painted ProcessAssembly Required: YesPower: 1000WDisplacement: 33CCEngine Type: Single Cylinder, Air Cooling, 2-strokeImpact Frequency: 3200min-1Impact Energy: 30JMax Torque and Speed: 1.45N.m/5300rpmFuel Mixture Ratio: 25:1 (Gasoline: Motor Oil)Fuel Tank Capacity: 0.9L/0.2gal/30OzFuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per HourMax Drilling Diameter: 40mm/1.5inchStarter System: Hand Pull StartNoise: ≤104dBNet Weight (Exclude Drill): About 10.5kg/23lbsProduct Size: 67.2*25*24.5cm/26.5*9.8*9.7inEngine Size: 36*32mm/14*12inchDrill Size: 22*350mm/0.8*13inchPoint Chisel Size: 18*350mm/0.7*13inchFlat Chisel Size: 16*280mm/6*11inchAuxiliary Handle Length: 13cm/5inchPackage Included:1* Hammer Drilling Machine3* Drills1* Point Chisel1* Flat Chisel1* Fuel Tank1* FunnelOther Accessories for AssemblyNotes:1. Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder.2. Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally.3. Please add lubricating oil regularly to ensure strong power.4. Please do not touch the muffler exhaust hole to avoid scalding.5.The mixing ratio of gasoline and engine oil is generally 25:1, but due to the difference of engine oil quality in different regions, we recommend the ratio of 20:1.

• 【Product Specification】This is gas powered demolition jack hammer, Power: 1200W, Displacement: 33CC, Engine Type: Single Cylinder, Air Cooling, 2-stroke, Impact Frequency: 3200min-1, Impact Energy: 30J, Max Torque and Speed: 1.45N. m/5300rpm, Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil). Max Drilling Diameter: 40mm/1.5inch, Noise: ≤104dB, Net Weight (Exclude Drill): About 10.5kg/23lbs.
• 【Strong Power】The 2-stroke engine with high power (1200W) and large displacement (33CC), as well as an enlarged thick-walled cylinder, can achieve a high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate concrete, bricks, rocks, etc with a high speed (5000rpm).
• 【3-in-1 Functions】This gasoline concrete breaker is equipped with three drill bits and two different chisels, it can be used for hammer, drill, or pick by adjusting the knob on the side to meet your diversified needs. The collet adopts a clamping design to prevent the drill bit or chisel from falling off. The wireless design and light weight can improve the flexibility of operation. You can pull the rope to start the machine.
• 【Good Filtering Effect】The built-in air fil-ter can well filter impurities in gasoline to reduce engine consumption and extend its service life. The heat dissipation holes on the sides can dissipate heat in time and prolong the service life of this demolition hammer. The internal silencer can reduce the noise (≤104dB) when in use to protect your hearing.
• 【Wide Applications】Hammer Function (Drilling While Hammering): This applies to drilling holes in concrete, floors, brick walls, stones, and solid walls. This demolition jack hammer is suitable for electricians and carpenters. Pick Function (Hammer Without Drilling): It is suitable for crushing, chiseling, digging, grooving, cutting, and other operations on concrete, masonry structure, and asphalt pavement.