3" Diamond Convex Polishing Pad and 5/8"-11 Backer Pad Convex - Wet Grinding Polishing Tile Stone Marble Granite Concrete Ceramics Glass 8Set

Precautions: When the grinding disc is operated, it must be used with the sticking plate installation machine. The wet grinding disc needs to be cooled by adding water when grinding. Microcrystalline stones, polished tiles, etc., which have a mirror effect, cannot be processed. Wear protective gloves, masks and other protective equipment when working. Glazed tiles are not recommended Rough grinding: 50#~100# The grinding disc has obvious grinding marks, which is used to trim the flatness of the grinding material and grind the modeling surface in place. Semi-fine grinding: 200#~300# The rough grinding marks are removed, but new finer lines will be formed, and the machined surface will be polished smoother. Fine grinding: 400#~1000# The pattern, particle and color of the product after fine grinding have been clearly displayed, and the surface is fine and smooth, with a weak gloss. Fine grinding: 1500#~3000# The processed product has no visible traces, the surface is getting smoother and smoother, and the gloss is about 40-50 degrees. The color of the back of the wet polishing pads of different meshes will be different for easy identification 1. Choose a suitable small and thicker grinding disc to start working, and end at the large and thinner Yes, in order to achieve a good polishing effect, it is recommended not to skip the number. ②. Roughly it is not the smoothness of the ground, correctly judge the starting number of grinding, On rough ground, start grinding with a coarser particle size first, otherwise it will take more time to achieve the desired effect. ③. If you find that it takes a lot of time to grind away the scratches, you have to change to a coarser grinding disc, which will save you a lot of time.

• Packing:3inch 50 to 3000 Grit Diamond Concave Polishing Pads and Backer Pad 8pcs/set
• Polishing Pads Diameter 80mm, total thickness 15mm, middle hole 11mm, Backer Pad Diameter 78mm, total thickness 43mm, 5/8"-11 Thread
• Polishing the material. Concrete, granite, marble, glass, stone, tile, stone, glass, ceramics, hard plastic, fiberglass, etc.
• When the grinding disc is operated, it needs to be used with the sticking plate installation machine. The wet grinding disc needs to be cooled by adding water when grinding.
• Strong bonding, no flying pieces, repeated tearing and pasting, no damage, sharp and wear-resistant, no burning, no staining, and long service life