2 Pieces Wall Mounted Sink Hook Bracket 1224196, Sink Wall Mount Bracket Compatible with Kohler Wall Mounted Sinks Basins and Urinals for Bathroom Installation

This sink wall mount bracket kit is compatible with Kohler wall mounted sinks and basins that use the 1224196 hook mounting structure. Each wall mounted sink hook bracket is formed from solid stainless steel to support fixture weight through rear wall engagement providing stable long term mounting for ceramic sinks and urinals.The kohler sink wall mount design allows the fixture to hang securely during installation while adjustment slots help achieve proper leveling before final fastening. Once installed the bracket maintains consistent alignment and minimizes movement caused by daily use or fixture weight.This product is intended for use where structural support is required and should be installed on suitable wall framing or solid substrates with appropriate anchors.Product Specifications：Compatible Reference Model：1224196Product Type：Sink wall mount bracketMaterial：Stainless steelFinish：Corrosion resistant plated surfaceQuantity Included：2 piecesApplication Type：Wall mounted sinks and basinsMounting Location：Rear wall hanger pointsInstallation Surface：Stud wall concrete masonry or brickFasteners Included：No

• 【Compatibility】Compatible with Kohler wall-mounted fixtures that use the 1224196 hanger hook layout, where fixture weight is carried by rear wall-mounted hanger brackets. Intended for wall-hung lavatories, pedestal sinks that rely on wall support, utility/laundry sinks, and wall-hung urinals built around this mounting structure. Compatibility is determined by hanger geometry, hole spacing, and rear cavity depth—not by brand alone; fixtures with shallow backs or non-hook mounting systems are not suitable
• 【Replacement Part Reference & Mounting Function】Structural replacement hanger hooks that replace 1224196 for fixtures compatible with Kohler wall-mount systems. These brackets install at the rear wall mounting points and act as the primary load-bearing interface between the fixture and the wall, allowing the sink or urinal to hang securely and seat flush against the finished surface during installation and long-term use
• 【Material & Mechanical Strength Advantage】Manufactured from extra-hard stainless steel with a plated surface treatment for corrosion resistance in humid bathrooms and commercial restrooms. Compared with thin stamped steel brackets, the rigid stainless construction provides greater resistance to bending, permanent deformation, and fatigue under sustained load, supporting heavy ceramic fixtures and repeated service cycles
• 【Installation & Load Control Design】The formed hook profile incorporates a raised support lip that captures the fixture during hang-up, while an elongated adjustment slot allows precise horizontal leveling before final fastening. Two round fixing holes are then used to lock alignment and distribute load across fasteners, reducing point stress and minimizing long-term movement. Designed for installation on stud walls, masonry, concrete, or brick when paired with appropriate anchors (fasteners not included)
• 【Dimensional & Structural Characteristics】Each bracket measures approximately 2.79 in long × 1.73 in wide × 0.20 in thick. The one-piece formed profile and substantial thickness create a stiff, non-flexing support interface, intentionally heavier than decorative sink brackets. Adequate rear cavity depth is required for the fixture to seat fully against the wall
• 【Application Scope & Use Context】Commonly used as replacement or service hardware for compatible with Kohler wall-mounted sinks and urinals in residential bathrooms, commercial restrooms, laundry rooms, and facility maintenance projects. Selected where stability, load capacity, and long-term alignment are prioritized over ultra-thin or decorative mounting solutions. Not a universal fit