1PCS Night Flight Light for Hover X1 Pro/Pro Max RC Drone Model 3D Printed PLA Strobe Lighting Searchlight 7 Colors Mini Signal Lamp DIY Accessories (Black)

yuenhoang 1PCS Night Flight Light for Hover X1 Pro/Pro Max RC Drone Model 3D printed PLA Strobe Lighting Searchlight 7 Colors Mini Signal Lamp DIY AccessoriesPay attention: Charging must use a low-voltage charging plug! Fast charging plug may easily damage the internal circuit!Specification:- Item name: night flight light/strobe light- Material of bracket: 3D printed PLA- Weight: about 5.2g- Colors of the light: white, red, green, blue, yellow, purple, light blue- Modes: fast flashing, slow flashing, constant on, etc.- Used for Hover X1 pro/pro max.Feature:- The buckle of the lamp features an asymmetric design, which allows it to be more securely installed on the aircraft. During installation, first clip the red edge onto the aircraft, then press the other edge to complete the installation.- It takes 12 minutes to fully charge, and it can last for about 1.5-2 hours. It is recommended to charge it before use if it hasn't been used for a long time.- Press and hold the button to power on/off, and press briefly to switch modes.Note:- Size is manual measurement, there are exist errors.- The product is a 3D printed part, and slight layer lines on the surface are normal phenomena, which do not affect normal use.Please do not place an order if you mind.Package include:1pcs x light

• - Item name: night flight light/strobe light : Used for Hover X1 pro/pro max.
• Warning: Only use a low-voltage charging plug! Fast charging plugs may easily damage the internal circuit! Output: 5V 1A
• READ!!=IMPORTANT: The buckle of the lamp features an asymmetric design, which allows it to be more securely installed on the aircraft. During installation, first clip the red edge onto the aircraft, then press the other edge to complete the installation. - It takes 12 minutes to fully charge, and it can last for about 1.5-2 hours. It is recommended to charge it before use if it hasn't been used for a long time. - Press and hold the button to power on/off, and press briefly to switch modes.
• - Modes: fast flashing, slow flashing, constant on, etc, Colors of the light: white, red, green, blue, yellow, purple, light blue
• - Material of bracket: 3D printed PLA